![]() ![]() Lower temperatures and/or higher humidity can increase drying time. Wipe away all excess finish.ĭrying time approximately 12 hours under normal climate conditions (73*F/50% relative humidity). Approximately 194 sqft/1 L.Īllow to penetrate for 30 minutes. Resistant against wine, beer, cola, tea, fruit juice, milk, and waterĮasy cleaning and maintenance – spot repairableįirst coat on the raw, sanded wood. ![]() Microporous – won’t crack, peel, flake, or blister It is even suitable for children’s toys.įor exotic & oily wood species, dark hardwoods, and figured wood When dry, the finish is safe for humans, animals, and plants. Resistant against wine, beer, cola, coffee, tea, fruit juice, milk, and water in accordance with industrial norms. Meets the wood’s natural demands: it is microporous and does not crack, flake, peel, or blister. Osmo Wood Wax Finish Clear Extra Thin is resistant to water and dirt, is very durable, and smooths wood surfaces. To remove day to day, dust, dirt, scuffs and light marks use Osmo Spray Cleaner.įor more stubborn marks, light scratches or if the surface is starting to look tired or worn, an application of Osmo Liquid Wax Cleaner may be required.Clear, satin wood finish designed for exotic and oily wood species. Surfaces treated with Osmo Wood Wax Finish Transparent should be dry wiped from time to time with a soft lint free cloth. Do not exceed a ratio of 10 parts Polyx®-Oil 3054 to 1 part Wood Wax Finish. Tinting: Osmo Wood Wax Finish can also be used to lightly tint Polyx®-Oil 3054 up to a ratio of 10:1. In order to protect the pigments, 1-coat of clear Osmo Polyx®-Oil is necessary as a top coat.There is too much material on the surface when you can see rings.Disperse and polish the floor using a floor buffer and white pads.Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar.Stir the Wood Wax Finish well prior to use.Product excesses and roller tracks must be roller or smoothed out immediately.Īpply one thin coat with an Osmo FloorxCenter or floor-buffing machine. Please be aware that Osmo Wood Wax Finish has a high yield (see product label). A lightly saturated roller will allow the user to cover approximately 43-53 ft2 (4-5m2) of flooring. Tip: The microfiber roller should only be saturated lightly. Clean roller with Osmo Brush Cleaner and Thinner (benzene-free) or Turpentine.Roll very thinly and evenly onto the wood following the grain.Take the Microfibre Roller and roll well on the grid of the tray.Stir the Wood Wax Finish well and pour into tray.WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof containerĪpply two thin coats with an Osmo Microfibre Floor Roller. Clean brush with Osmo Brush Cleaner and Thinner (benzene-free) or Turpentine.Apply second coat following the previous steps.Allow for good ventilation whilst drying. Allow 8-10 hours drying time before recoating.For a subtle glazing effect, apply thinly with a cloth, and within 20 minutes wipe away excess.Apply with the brush thinly along the wood grain on the clean and dry wood surface.Two coats is not recommended for high-wear surfaces like flooringĪpply two thin coats with an Osmo Floor Brush or Osmo Natural Bristle Brush for smaller areas.Once first coat has dried (8-10 hours) apply a second thin coat for a solid colour.Intensive (2-coats): Apply two thin coats with a lint-free cloth. For flooring, a top coat of Polyx®-Oil 3054 is required for added durability against wear and stains.Working with the grain, remove all excess product from surface with a clean lint-free cloth.For a subtle effect: allow roughly 15-minutes for oils to penetrate and then proceed to step 4.For a more solid colour, ensure product is applied evenly, then proceed to step 5.Work product thinly and evenly onto wood using cloth.Transparent (1-coat): Apply a thin coat with a lint-free cloth. Thoroughly remove all traces of sanding dust with a vacuum cleaner before application.Sand carefully before application starting with a coarse paper – final sanding for flooring should be with a P80 to P120 grit sandpaper and P120 to P150 for furniture.Surface coatings such as paint, varnish and other surface sealers must be fully removed by sanding or with a suitable paint and varnish remover.Wood surfaces to be treated with wax finish must be clean, dry and free from surface dirt and debris. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |